How to maintain and care for Luoyang bearings

　Luoyang BearingIf you want it to maintain good working condition and performance for a long time after installation, you must pay attention to daily maintenance and care, so as to prevent problems before they happen, ensure its operational reliability, and improve its production performance. The maintenance and care of Luoyang bearings should be carried out regularly, including monitoring its operating status, replenishing or replacing lubricants, and regular disassembly and inspection, all of which should be completed in accordance with the operating standards of the mechanical operating conditions.

Bearing lubrication is a good way to maintain Luoyang bearings. Lubrication and maintenance can reduce abnormal friction between bearing rings and rolling elements and retainers, avoid excessive wear, extend the service life of other pipes, and allow the heat generated by friction to cool as quickly as possible, preventing other foreign matter from invading the inside of the bearing and affecting its normal operation. The lubrication and maintenance of Luoyang bearings are divided into grease lubrication and oil lubrication. If you only want to improve the lubrication of the bearing through maintenance, oil lubrication is suitable. If you want to simplify the characteristics of the structure around the bearing through maintenance, grease lubrication is suitable.

　　When maintaining Luoyang bearings, they must also be professionally cleaned. This requires removing the bearings from the baseline. First, check the appearance of the bearings to determine the amount of lubricant residue, and then use a cleaning agent or kerosene to clean the bearings. When operating, place them in a special container with a metal mesh pad underneath. Do not let the bearings directly contact the dirt at the bottom of the container during the cleaning process.

When cleaning the Luoyang bearing, it should be rotated while cleaning to avoid damaging the rolling surface of the bearing. Moreover, a clean brush should be used to remove the grease and attachments inside it. After cleaning it, it should be placed in the cleaning oil and rotated for careful cleaning. Here, attention should also be paid to the cleaning oil for cleaning the bearing. It should be replaced frequently to keep it clean and cannot be used for a long time.

　　Luoyang bearingAfter cleaning, it must be carefully inspected. Check the status of the pipe surface, rolling surface and mating surface of the Luoyang bearing, as well as the integrity of the cage. If it is found that the gap between the bearing parts has increased or the dimensional accuracy has decreased, it is necessary to replace the bearing in time. Some non-separable small bearings can be inspected by holding the inner ring horizontally by hand and then rotating it. However, large bearings cannot be rotated by hand and must be inspected with special equipment. The more important the bearing is, the more detailed the maintenance inspection should be.