The correct disassembly method of Luoyang bearing

Luoyang bearings have a large sales volume in the market and are an important part of many industrial machinery. Luoyang bearings should be maintained on time after being used for a period of time. They may also be damaged and need to be replaced with new bearings. At this time, it is necessary to master the correct way to disassemble them. Do not blindly use a hammer or hard objects to disassemble them, and use special tools to complete them.

　　Pay attention to safety when disassembling Luoyang bearings, because many Luoyang bearings have suffered serious wear at the end of their use. If they are disassembled violently or using improper methods, metal fragments of the bearings will fly everywhere, which can easily cause danger to the workers who are disassembling them. Therefore, when disassembling the bearings, be sure to prepare a protective blanket to cover them.

　　There are some Luoyang bearings with correctly designed support dimensions and good clearance fit. As long as they are not over-deformed or severely corroded, they can be removed in the right direction, and the removal process is particularly simple. However, some cylindrical bearings require a special puller when dismantling. The pullers on the market are divided into two-claw and three-claw, as well as threaded and hydraulic types. Among them, hydraulic pullers are highly practical and have a high safety factor.

　　In some parts of railway vehicles, there are some integral bearings. Such bearings are more troublesome to disassemble and require the use of special mobile disassembly devices. When the size of the bearings on the train increases, the strength of the tools for disassembling the bearings will also increase. Sometimes, in order to cooperate with the disassembly of the bearings, special disassembly tools need to be designed. If the ordinary methods cannot be removed during the disassembly process, an oil hole should be designed at the end of the damaged Luoyang bearing and an appropriate amount of lubricating oil should be injected to reduce its resistance.